This is 100% up to you! The easiest install is in a stacked install in the Panzer Fight Stick 3, in my opinion. However, any fight stick with room to add extra equipment will work with the Brook Retro Board when hooked up properly.
There are MANY ways to install in each fight stick, I do not have each stick instructions available. I can create guides for each, however, it will require a significant investment in fight sticks and time meaning each would video/guide would need some sort of sponsor.
Generically, you will need to do something like this:
- Get an RJ45 connector on the housing of the case. This may require drilling into plastic to install it.
- Solder the existing USB cable to the J7 USB pins on the RETRO BOARD.
- Connect all of the buttons/joystick signals to the RETRO BOARD via the screw terminals or the 20 pin connector.